Products
- Wall Curing Agent Adhesive
- Stone like Paint
- Interior Wall Paint
- Colorful Paint
- Latex Paint for Exterior Wall
- SBS Liquid Coil Polyurethane Waterproof Coating
- RG Waterproof Coating
- Waterborne Polyurethane Coating
- Ceramic Tile Adhesive
- Transparent Waterproof Adhesive
- Compound Adhesive
- Waterborne Industrial Paint Emulsion
- Coating Additive
- Rust Converter
- Rust Stabilizer
- Sand Fixing Agent
- Pressure-sensitive Adhesive
- VAE Emulsion
- Textile Emulsion
- Waterproof emulsion
- Architectural Emulsion
0102030405
Environment-friendly Cement Wall Interface Treating Agent Wall Curing Agent Adhesive
description2
VIDEO
Advantage
Our wall curing agent is single component product made from copolymer emulsion through many processes, which has good water resistance, alkali resistance, heat resistance, moisture resistance and resistance to freezing and thawing. It’s eco-friendly, odourless and safe.It is the substitute of traditional 108 glue and interface adhesion agent.
With excellent permeability,it help to improve the interface adhesion, improve the adhesion strength of mortar or putty and wall surface, prevent hollow and crack. It is suitable for wall plastering or scraping putty before the base compaction treatment. It greatly improve the bonding strength of putty, latex paint, wallpaper, mortar,etc. with cement.
Direction for use
The base surface should be clean without dust and oil before painting.Mixed with some water, the agent could be painted on the base surface with a roller, brush or spray gun once or two times.
The base surface should be flat. The temperature should be over 5 and it is not raining while painting. The agent should be mixed with water completely.
About the product
Packing: 18kg/barrel
Storage: Store in a dry and cool place, the environment is around 5~40℃
Shelf life: 6 months.If it exceeds the shelf life, it can still be used after inspection.
Product Display
Reminder
1.Clean all tools promptly with water after coating work is finished or stopped.
2.The ventilation conditions should be good at the construction site.
3.The lid of the bucket must be tightly closed, keep it out of the reach of children. In case of eye contact, wash with water immediately.
4.The product does not contain toxic gases and mercury.
5.Do not pour the remaining unused product down the drain or exhaust pipe.
6. The temperature should be over 0℃ in the winter in case of being frozen.