English
Leave Your Message
Toilet and Roof Acrylic and Styrene Waterproof Emulsion HX-400 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating

Products

Products Categories
Featured Products
Waterproof Emulsion HX-470 for Anionic, Cationic and Non-ionic Emulsified Bitumen

Waterproof Emulsion HX-470 for Anionic, Ca...
Waterproof Emulsion -- Waterproof Emulsion HX-416

Waterproof Emulsion -- Waterproof Emulsion...
Elastic Acrylic and Styrene Waterproof Emulsion HX-418 for Single and Two-component Cement Waterproof Coating

Elastic Acrylic and Styrene Waterproof Emu...
Toilet and Roof Acrylic and Styrene Waterproof Emulsion HX-400 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating

Toilet and Roof Acrylic and Styrene Waterp...
Acrylic and Styrene Waterproof Emulsion HX-416 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating

Acrylic and Styrene Waterproof Emulsion HX...
Waterproof emulsion | Waterproof Emulsion HX-406

Waterproof emulsion | Waterproof Emulsion ...
Acrylic and Styrene Waterproof Emulsion HX-408 for Thermal Insulation Mortar and Cement Waterproof Coating

Acrylic and Styrene Waterproof Emulsion HX...
Architectural Emulsion HX-305

Architectural Emulsion HX-305
Modified Acrylic and Styrene Architectural Emulsion HX-303 for Middle and Top Grade Exterior and Interior Wall Coating

Modified Acrylic and Styrene Architectural...
Architectural Emulsion -- Architectural Emulsion HX-302G

Architectural Emulsion -- Architectural Em...
0102030405
Toilet and Roof Acrylic and Styrene Waterproof Emulsion HX-400 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating
Toilet and Roof Acrylic and Styrene Waterproof Emulsion HX-400 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating

Toilet and Roof Acrylic and Styrene Waterproof Emulsion HX-400 for Thermal Insulation Mortar and Two Component Cement Waterproof Coating

HX-400 is styrene acrylic copolymer emulsion made from acrylate and monomeric substance with special function, mainly used in the production of coatings with high elasticity and two component cement-based polymer waterproof coatings which is called JS coating in China. It’s also used as adhesive in building mortar to improve the strength and flexibility of concrete and thermal insulation mortar which is used in buildings to improve the thermal insulating property and fire performance of buildings.

    Contact us

    description2

    Advantage

    ·This emulsion is eco-friendly. It meets the requests of Chinese standard (JC1066-2008), and the water resistance is superior to the similar products in the market.

    ·The two component JS coating made from it has a long open time after being mixed. So more quantity of coatings can be mixed in one time to save time and labor.

    ·The emulsion has excellent bonding and adhesion with surface of building base. So It is easy to paint the building with the coatings made from this emulsion. Moreover it’s also easy to repair and the waterproof membrane.

    ·The emulsion has excellent leveling performance and it won’t flow down on the vertical wall. it can painted   on the wet base. 

    ·Because of excellent weather resistance, heat resistance and UV resistance, this emulsion is widely used to produce different waterproof coatings for building roof, wall, kitchen and bathroom. 

    parameters

    400JS-IIType test result

    Test items

    Test result

    Solid content ：≥ 70%

    76.5%

    Tensile strength（STD ≥ 1.2Mpa）

    2.3

    2.42

    2.39

    Elongation at break（STD ≥ 200%)

    123

    138

    129

    Low temperature flexibility(radius 10mm rod）

    -10℃ No cracks

    Impermeability（0.3Mpa,30Min)

    Impermeable


    400JS- Ⅱ Type recommended  formula

    Material name

    Mixture ratio

    400

    400kg

    Water

    100kg

    Sterilization

    4kg

    Defoaming

    5kg

    AMP-95

    3kg

    TT-935

    appropriate amount

    42.5 ordinary Portland cement

    500kg

    400 meshes coarse whiting

    200kg

    80-120  meshes quartz powder

    300kg


    400JS-IIType testing result

    Testing items

    Testing result

    Solid content ：≥ 70%

    74.7%

    Tensile strength（STD ≥ 1.2Mpa）

    2.82

    2.76

    2.54

    Elongation at break（STD ≥ 200%)

    268

    271

    282

    Low temperature flexibility(radius 10mm rod）

    -10℃ No cracks

    Impermeability（0.3Mpa,30Min)

    Impermeable


    400JS-  Ⅰ Type  recommended formula

    Material name

    Mixture ratio

    400

    450kg

    Water

    50kg

    Sterilization

    2kg

    Defoaming

    2kg

    AMP-95

    1.5kg

    TT-935

    Appropriate amount

    42.5 ordinary Portland cement

    250kg

    400 meshes coarse whiting

    100kg

    80-120 meshes quartz powder

    150kg


    Product

    Tg℃

    Solid content %

    Viscosity (cps/25℃)

    PH

    MFFT℃

    HX-400

    -10

    55±1

    1000-1800

    7-8

    0


    Product Display

    showsslrsWaterproof Emulsion HX-40830f5Waterproof Emulsion HX-40822or

    Characteristics

    It is weather resistant, heat resistant, ageing resistant, UV resistant and its elongation is high. With good elasticity and flexibility ,it able to adapt to some deformation within limited degree because of cracking.The waterproof membrane will not be broken because of the slight cracking of base surface. So the membrane can keep waterproofing. This emulsion has good compatibility with pigment and other powders. So the pigments can be added into waterproof coatings to get the customized color for customers to decorate their building.  The waterproof coating made from it has combined function of decoration and waterproofing.

    Packing and storage

    Package:  Plastic tank or bucket.
    Packing: 50kg, 160kg or 1000kg
    Storing and transporting conditions: In unopened container and in a ventilated cool dry place, avoid being exposed to direct sunlight. Temperature for transportation and storage: between 5 and 35℃. Higher temperature or high humidity may reduce shelf life.